G60-12A 12V 智能铅酸蓄电池充电器,电动车充电器,汽车电瓶充电器
- 规格参数
- 输入: 100~240V
- 输出: 13.8V 3.3A
- 充电过程: 智能四段式 ，可修复久置硫化失效电池
- 充电指示: 特有电池电量状态显示，25%-100%
- 输出保护: 短路保护、输出反接保护
- 安全认证: CE cUL
- 尺寸大小: 120 x 67 x 41mm
- 适用电池范围: 12V 4~40Ah 铅酸蓄电池
详细描述
G60-12A is a main member of digital-chargers from Green Digital Power-tech Co., Ltd. It represents today's new technology for lead-acid type battery charging. G60-12A programmed four auto stages (Ud-Im-Uo-Up) charging process, It is designed for all kinds of 12V 7~80Ah lead-acid battery, such as SLA, AGM and Gel battery. Stage "Ud" desulfurating the battery through 18V pulse，When the battery recovered, stage "Im" will give bulk current charging( 3.3A or 2.0A). Then, "Uo" stage is followed, the output voltage is limited on 14.7V; When the battery is nearly full, stage"Up" will turn on duty. At this stage, the battery is charged completely and the charger give some pulse to maintenance the battery.
Further, G60 can display the charging process, indicate the battery capacity from 25% to 100% timely. This is helpful for user.
For more safety, G60 will inter protection mode when the battery polarity reversed or the output connectors shorted.
Specification for G60-12A
|
Input Voltage |
100-240VAC, 50-60Hz |
|
Input Current |
|
|
Back current drain |
1.3mA |
|
Charge voltage |
Rating 12V, Bulk limited voltage : 14.7V |
|
Ripple current |
Current-ripple:<= |
|
Bulk charge current |
|
|
Operate Temperature |
|
|
Cooling |
Natural convection. Do not cover the charger. |
|
Charge principle |
Auto 4 stages: Ud-I-Uo-Up |
|
Battery type |
All types of 12V lead-acid batteries.( SLA, Gel, AGM….) |
|
Battery capacity |
7-80Ah for G60 |
|
Size |
120X67X |
|
Enclosure |
IP54 (Dust protected, Water splashing resistance) |
|
Weight |
|
How to use:
1. Connect the AC cord to the socket, The "power" lamp will light on RED.
2. Connect positive charger clip (red) to positive battery terminal, the black clip to negative. (You can use other dc plugs to connect battery), the "25%~100%" lamps will light on flowing. If the battery polarity reversed or output shorted, all lamps will flashing, please check the setup.
3. Depend on the charged capacity, 25%~100% lamps will lights up solid sequence, until the battery is fully charged. Then you can power off the charger and disconnect the battery or you can charge a new battery if you need.
The table shows the duration of the Bulk stepup to about 80% state of charge.
|
Battery type（Ah） |
G60 |
G60-12AS (hours) |
|
12 |
3 |
5 |
|
22 |
7 |
10 |
|
45 |
14 |
20 |
|
75 |
22 |
Not recommend |